Fixings for built-up lettering

Easy to install fixings for built-up lettering

Your built-up lettering will be pre-fitted with this type of fixing system.

fixings for built up letteringThis diagram shows how the fixings are mounted onto the back of your built-up lettering. If you specify face illuminated built-up lettering which has foam PVC backs the mounting pins will be bolted to the PVC. The fixing system is the same for both halo and face illuminated built-up lettering.

This built-up lettering system works on sign trays and panels too. After step 1 you simply drill holes into your sign panels and bolt the built-up lettering through to the backside of the panel. The space nuts supplied with your built-up lettering allows you to set a standoff distance from letter to sign panel.

Holes drilled in sign panels should be 7-8mm in diameter to accept the M6 threaded letter fixing studs.

Built-up letter fixing stage by stage diagrams

The process for using cup and peg locator fixings is detailed below:

This diagram shows a side elevation of the mechanics of built-up letter fixings.

Notes on this type of letter fixing:

It is very important that you blow out the fixing holes before injecting resin. If you do not do this the chemical resin bonds to the masonry dust, not the masonry.

Tools you will require for this letter fixing system

tool list for built up lettering fixings
Tool list for built-up lettering fixings

Letter fixings, simple fixing systems for all types of lettering.